User manual

SETTINGS
July 2012 / WPC / EN 9
correct use of time-related functions, e.g. the disabling of the auxiliary relays during the night.
5.4 USER LEVEL {5012}
The setting of the user level allows you to choose the access to the WPC according to your level of
expertise.
The INFO ONLY level may be selected by entering the code:
460081
This level does not allow the WPC configurations to be modified, it only allows information to be displayed on
the system.
Use the INFO ONLY level after adjusting the configurations if the remote control is located
in a public place or if it is accessible by people who are not authorized to carry out
adjustments on your system.
You may change the level at any time to make new adjustments, by entering the appropriate
code.
The BASIC level allows you to configure basic WPC functions, limiting the field of actions to simple
configurations. Please note that the incorrect adjustment of basic configurations may lead to the
malfunctioning of the installation. This level is selected by default. To return to this level after a change, enter
code:
943274
The EXPERT level allows access to more complex WPC configurations and this level of usage may only be
used with extensive specialist knowledge. To access the expert level, enter code:
426468
5.5 DRIVE THE REMOTE CONTROL TO THE USER LEVEL BASIC {5019}
You can with this option bring the remote control back to the level “user Basic”.
Use this function at the end of the system setting to go out of the EXPERT mode.