Specifications

RSLinx – Training Guide C - 17
Next, the rungs from the debug file:
Another possibility for a debug file might be to simulate a bit toggling on/off every 3
seconds, or going on for 4 seconds every ten seconds, etc. Again, a recycling timer could
be used, but this time in conjunction with a comparison instruction of some sort.
For example:
In the example above, B3/12 would come on for 4 seconds out of 10. To change the
duration it is on, or the duration it is off, simply change the limits in the LIM instruction, or
raise the accumulator in the Recycle Timer.