Specifications

RSLinx – Training Guide D - 11
NetDDE Reminders
• If you are using NetDDE in Windows NT, you must configure the Network
DDE DSDM services to start automatically before you can start the DDE
Server in RSView32.
This is configured under Services in the Control Panel. You only need to make
this configuration change once.
Ø If you do not do this, an error message is reported. However,
RSView32 can still function as a local DDE server. You only need to
make this configuration change once.
• If you are using NetDDE on Windows 95, you must run NetDDE each time you
start your computer by selecting Run from the Start menu and then typing
NetDDE in the Open field.
Ø You can start NetDDE automatically when you restart your computer by
adding netdde.exe to your Startup folder.