Specifications

RSLinx – Training Guide 29
4. Click Add New. The following dialog will appear to name the new driver:
• Use the default AB_KT-1
5. Click OK
• Then the following dialog will appear to choose the type of KT card and begin
configuration:
Click the
pulldown
arrow and
select KT.
Tip: Rockwell Software provides a utility to read your WINtelligent LINX configuration and
display it for use in configuring RSLinx.
This utility is available on the Rockwell Software website (www.software.rockwell.com)
or by contacting Technical Support at [phone].