Specifications

RSLinx – Training Guide 33
Lab / Discussion
1. Check if the connection to the DH+ is good by opening an RSWho.
• Click the RSWho icon.
Ø Alternatively, open an RSWho by selecting Communications / RSWho
from the top menu of RSLinx.
2. A right-click on an RSWho screen will allow you select many options, depending on
where you right-click, the RSWho below shows many of the RSWho right-click
menus.
• Note: you can not make all right-click menus appear at the same time
Note: RSWho will not browse through SoftLogix, Ethernet, or a Linx Gateway on a remote
RSLinx Gateway
Bridge
RSWho in Large Detail View
A Station that was once active,
but is no longer, is indicated
with a RED “X”