Specifications

34 RSLinx – Training Guide
3. Note that each device on the DH+ is identified by its own icon. Also displayed are
the station or project name and the station number.
4. In either the right or left pane of the RSWho, right-click on one of the PLC stations
and select Station Diagnostics. The following will appear:
Note: It is not a good idea to let RSWho screens run all the time in Autobrowse mode.
To keep an RSWho screen fresh, RSLinx must continually poll all the
processors on the network selected.
This generates a lot of network traffic and increases the load on RSLinx’s
network drivers. Rockwell Software suggests that an RSWho only be used
when necessary, then closed.
As an alternative if you would like to keep an RSWho open, uncheck the refresh
button and if you think the network might have changed, or you encounter a
problem, just press the manual Refresh button.
RSWho in Large Icon View