Specifications

• If Permission denied is indicated in maintenance-information-1, write and read permissions for the status
file indicated in status-file-name might have been changed. Change the permissions so that the user who started
the queueless agent service and the OS user who executes the queueless job can read and write to the status file
indicated in status-file-name. Then, restart the queueless agent service, or detach the logical host containing the
status file indicated in status-file-name that resulted in the error, and then attach it again.
• If any message other than the above is indicated in maintenance-information-1, correct the error according to
the message. Also check the following probable causes, and then correct the error, if any.
- The disk does not have sufficient free space.
- Memory is insufficient.
- A directory having the same name as the status file has already been created in the directory in which the status
file is to be created.
After correcting the error, restart the queueless agent service or detach the logical host containing the status file
indicated in status-file-name that resulted in the error, and then attach it again.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
Examples:
• In this example, the command detaches the logical host Lhost.
Execute the ajsqldetach command as follows:
ajsqldetach -h Lhost
For details on the ajsqldetach command, see ajsqldetach in 3. Commands Used for Special
Operation in the manual Job Management Partner 1/Automatic Job Management System 3 Command
Reference 2.
• In this example, the command attaches the logical host Lhost.
Execute the ajsqlattach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation
in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1817-E
IPC initialization failed, so the job (job-name) cannot be executed. (maintenance-information-1)
The queueless job indicated in job-name cannot be executed due to one of the following causes:
• An attempt to acquire the IP address from the name of the host on which the queueless job indicated in job-name
was executed has failed (a wrong IP address was acquired).
• A communication error occurred.
• Memory is insufficient.
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Take one of the following actions, and then re-execute the queueless job indicated in job-name that resulted in the
error.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
334