Specifications

• Check whether communication is possible with all the target hosts displayed by the ajsagtshow command.
• Check whether any process is accessing a file in the JP1/AJS3 installation path.
• Check whether memory is sufficient.
Correct the above problems, and then check whether the event jobs and start conditions work normally.
If they do not work normally after a while, there might be a problem with the status monitoring of the event jobs
and start conditions.
Cold-start the scheduler service indicated in maintenance-information, or execute the jpomanevreset command.
For details on the jpomanevreset command, see jpomanevreset in 2. Commands in the manual Job Management
Partner 1/Automatic Job Management System 3 Command Reference 1.
KAVT0342-I
Communication to check the operation of the Event Action SubManager has been restored.(maintenance-
information)
Communication to check the operation of the event/action control submanager has been recovered.
(S)
Continues processing.
KAVT0343-I
Communication to check the operation of the Event Action Manager has been restored.(maintenance-information)
Communication to check the operation of the event/action control manager has been recovered.
(S)
Continues processing.
KAVT0344-W
There is no response from the Event Action SubManager.(maintenance-information)
No response has been sent from the event/action control submanager.
(S)
Continues processing.
(O)
Check the following:
• Check whether a mass of events has been detected.
• For a physical host, check whether the disk that contains the JP1/AJS3 installation directory has sufficient free
space. Also check whether the installation directory can be accessed.
• For a logical host, check whether the shared disk has sufficient free space and can be accessed.
• Check whether communication is possible with all the target hosts displayed by the ajsagtshow command.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
522