Specifications

KAVT0347-I
A response from the Event Action Manager has been confirmed.(maintenance-information)
A response from the event/action control manager has been confirmed.
(S)
Continues processing.
KAVT0352-E
The connection to the network service was released. (maintenance-information)
The connection with the communication control process was lost.
(S)
Continues processing without changing the status of the event job or the jobnet with start conditions.
(O)
Check whether the communication control process has been stopped by the jajs_hstd_stop command.
For details, see jajs_hstd_stop in 2. Commands in the manual Job Management Partner 1/Automatic Job
Management System 3 Command Reference 1.
Use the following procedure to find out whether the communication control process has stopped for some other
reason.
In Windows
Use the jajs_spmd_status command to make sure the network process is running.
In UNIX
Use the jajs_spmd_status command to make sure the ajsnetwd process is running.
For details, see jajs_spmd_status in 2. Commands in the manual Job Management Partner 1/Automatic Job
Management System 3 Command Reference 1.
If the communication control process is not running, take the following action:
• If the jajs_hstd_stop command was used to stop the communication control process:
Ignore the message and continue operation.
• If the jajs_hstd_stop command was not used to stop the communication control process:
Something other than the jajs_hstd_stop command might have caused the communication control process
to stop. Use the error messages that are output before and after this message to determine the cause of the error,
and take corrective action.
If the process still does not start, use the following procedure:
In Windows
Use the jajs_hstd command to start the network process.
In UNIX
Use the jajs_hstd command to start the ajsnetwd process.
For details, see jajs_hstd in 2. Commands in the manual Job Management Partner 1/Automatic Job Management
System 3 Command Reference 1.
If the communication control process is running, a temporary communication error might have occurred. Take the
following action:
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
524