Installation manual

SIMDOS diaphragm metering pump Structure and operation
KNF Flodos BA_SIMDOS_EN_02_160044.docx
Translation of original operating manual 13
5.4. Functions overview
Main menu
1. Flow rate 1–100 ml/min or
metered volume 1–1,000 ml
2. Timeout/metering time
3. High-speed operation for priming or emptying
4. Pump calibration
5. Setting the pump for characteristics of the medium
- Standard: Aqueous media
- Degassing: Media with low boiling temperature
- Visk100cSt: Media up to 100 cSt
- Visk500cSt: Media up to 500 cSt
6. Go to system menu
System menu
7. Return to main menu
8. Selecting operating menu language
9. Analogue input: 0% to 100% flow rate *
0–10 V / 0–20 mA / 4–20 mA
10. Digital input 1: Start/stop with level or pulse signal via logic
input *
11. Digital input 2: Reset or high-speed via logic input *
12. Digital output: User selection of logic signal type: *
- Error/alarm - Motor turns (level)
- End of metering volume - Motor pulses
- Volume pulses (one pulse per 100 µl)
13. Autostart function (pump starts automatically when power
supply switched on)
14. Set display contrast
15. Reset pump to factory settings
16. Return to main menu
* RC functions are available for RC pumps only. See Chapter 8
for further details of the external drive system.
Fig. 8: Main menu
Fig. 9: System menu