Installation manual
Items included on delivery:
SIMDOS metering pump
Mains plug
RC cable (for RC version only)
Operating manual
Brief user guide
Operating manual CD-ROM
Connection kit: hose and screw connectors
Safety provisions
The SIMDOS 10 metering pump complies with the safety
provisions of the EC low-voltage directive 2006/95/EC and the EC
directive on electromagnetic compatibility 2004/108/EG. The
following standards are applicable:
EN 61010-1
EN 61326-1
Contents Page Contents Page
1.
About this document 3
1.1.
Use of the operating and installation manual3
1.2.
Symbols and flags 3
2.
Use 4
2.1.
Intended use 4
2.2.
Improper use 4
3.
Safety 5
4.
Technical data 7
4.1.
Pump materials 7
4.2.
Hydraulic ratings 7
4.3.
Accuracy / reproducibility 8
4.4.
Hydraulic connections 8
4.5.
Electrical data 9
4.6.
Other parameters 9
4.7.
External drive (RC version only) 10
5.
Structure and operation 11
5.1.
Metering pump structure 11
5.2.
Operating principle 11
5.3.
Metering pump functions 12
5.4.
Functions overview 13
6.
Assembly and connection 14
6.1.
Assembly 14
6.2.
Electrical connection 15
6.3.
External drive (RC version) 15
6.4.
Hydraulic connection 16
6.5.
Shutdown 18
6.6.
Transport and interim storage 18
7.
Operation 18
7.1.
Initial start-up 18
7.2.
Operating controls 19
7.3.
Main display 19
7.4.
Switching the pump on and off 20
7.5.
Starting the pump 21
7.6.
Interrupting a pumping operation 21
7.7.
Stopping the pumping operation 21
7.8.
Entering settings 22
7.9.
Specified flow 24
7.10.
Flow unit 24
7.11.
Timeout with time counter 24
7.12.
Priming 25
7.13.
Fluid type 25
7.14.
Calibration 26
7.15.
System settings 27
7.16.
Back to main menu 27
7.17.
Language setting 27
7.18.
Auto start 28
7.19.
Contrast 29
7.20.
Reset 29
8.
RC version – external drive 30
8.1.
External drive analogue input 30
8.2.
Digital input 1, Start/Stop 32
8.3.
Digital input 2, Reset/Prime/Pedal switch 34
8.4.
Digital output 36
9.
Maintenance 37
9.1.
Maintenance plan 37
9.2.
Cleaning 37
9.3.
Cleaning/replacing valve plates and pump
diaphragm 38
10.
Troubleshooting 42
11.
Spare parts and accessories 44
11.1.
Spare parts 44
11.2.
Accessories 44
12.
Decontamination statement 45
KNF FLODOS AG
Wassermatte 2
6210 Sursee, Switzerland
Tel. +41 (0)41 925 00 25
Fax +41 (0)41 925 00 35
www.knf-flodos.ch
info@knf-flodos.ch