Installation manual

SIMDOS diaphragm metering pump Operation
KNF Flodos BA_SIMDOS_EN_02_160044.docx
Translation of original operating manual 27
7.15. System settings
Select “System” to bring up a second menu list for the entry of
further pump settings.
7.16. Back to main menu
Click on “Back” to return to the main menu for entering pump
default settings.
Other options for returning to the main display are as follows:
 Press the “STOP” button: this ends the input operation, and
the display switches back to the main display.
The pump will stop when this operation is carried out.
 Press the “START” button: this ends the input operation, and
the display switches back to the main display.
The pump starts when this operation is carried out.
 Wait for 10 seconds without entering any inputs. This ends the
input operation, and the pump switches back to the main
display.
7.17. Language setting
The language setting operation selects the required language for
the operating menu.
Fig. 38: System menu
System 
Fig. 39: Back to main menu
System 
Fig. 40: Language selection