User's Manual

User Guide P. 13
• Turn the ignition key to the IGNITION ON (RUN) position.
• Press and release the button and you will hear a beep. L-01 will appear on the display. Then
press the button for 3 seconds (the parking lights will flash once).
When the system exits Cold Weather Mode, the remote control will beep once and the icon will
disappear.
To verify whether the system is in Cold Weather Mode:
Press the brake pedal: If the vehicle is in Cold Weather Mode, the parking lights will stay on while
the pedal is pressed.
How to access Cold Weather Mode
Function Button pressed Icon Sound Instructions /description
To enter Cold
Weather Mode
+
Beep
To exit Cold
Weather Mode
+
None Beep
Press and hold for 3
seconds.
Extended Run Time
While the vehicle is running under a remote start, pressing and holding the button for more
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning. There will be one beep a pause three more beeps; the parking lights will flash
three times and the horn (if configured) will honk once. The extended run time procedure can
only be carried out once per remote start.
To stop the vehicle, at any moment, simply press the
button.
Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle
has been running for 2 minutes already, pressing the button will reset the counter
to zero and allow the engine to run for another cycle (in this case, 3 minutes).
Advanced Features: Installation-programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.
Remote Door Locks
If your remote starter was installed with the remote door locks option, you will have the
convenience of remote keyless entry. See section Arming the Starter Kill, on page 8, for further
instructions on remote door locking and unlocking.
Priority Door Access
If the priority door locks option is installed on your vehicle, this safety feature allows you to unlock
solely the driver’s door with a single press of the
button on the transmitter; upon a second
press of the
button, all the other doors will unlock.
Ignition-Controlled Door Locks
This is an added security feature. If your remote starter was installed with the ignition-controlled
door locks option, the doors will automatically be locked as soon as the ignition key is turned to the
IGNITION ON (RUN) position while the brakes are pressed. When the key is turned to the OFF position,
the doors will automatically be unlocked.