User's Manual

Cold Weather Mode
When the Cold Weather Mode is active, the engine starts every 2 hours and runs for 4 minutes (or
for 9 or 20 minutes with Diesel engines); this routine will go for a period of 24 hours.
To activate Cold weather Mode:
Press and hold start/stop button for three seconds. The parking lights will flash 3 times. There will
be one (1) beep as a confirmation and the
icon will be displayed.
If in safe start Mode, to activate Cold Weather:
Press and hold start/stop for 1second, the parking lights will flash once. Press and hold start/stop
again for 3 seconds, the parking light will flash 3 more times.
To exit Cold Weather Mode, do any of the following:
a) Open the Hood.
b) Start the Engine by remote.
c) Turn the Ignition Key to the
IGNITION ON (RUN) position.
d) Place the vehicle into Valet Mode.
Press and hold START/STOP buttons for 3 seconds the
icon will disappear.
To exit Cold Weather in Safe Start Mode:
Press and hold START/STOP for 3 seconds, the parking light will flash 3 more times.
You can also exit Safe Start Mode by using steps “a” to “d” from the above description.
Priority Door Access
When programmed, this safety feature lets you unlock solely the driver’s door with a single press of
the
UNLOCK button on the transmitter; upon a second press of the UNLOCK button, all the other
doors will unlock.
The user-selectable options are as follows:
• Remote Door Locks
• Safe Start
• Starter Kill/ Anti-Grind
• Passive or Active Arming Starter Kill
• Ignition-controlled Door Locks
• Horn Honk on Lock
• Ignition Re-lock
• Secure Lock
• Remote Trunk Release
• Engine Run Time
• Multi-car Operation
• Turbo Mode (Turbo Cars)
Remote Door Locks Option
If your AS-2510 TW was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
Safe Start
If this feature is enabled, it will require the user to press the
START/STOP button twice within 3
seconds to start the vehicle. This will eliminate accidental remote starts (for example: if there are
children playing with the Transmitter). To stop the vehicle, the user must press START/STOP once.
Starter Kill Option
With this added security feature, the system will prevent your vehicle from starting with the Ignition
Key when the Starter Kill is armed. If your Autostart was installed with the Starter Kill option, you
will not be able to start your vehicle with the Key unless the system has been unlocked first.
Passive or Active Arming
The Starter Kill option can be programmed to be active (will not arm automatically) or passive (will
arm automatically). In Passive Mode, the system can be configured to arm automatically either
after 1 minutes or after 3 minutes. If installed, the Starter Kill of your AS-2510 TW is configured by
default to a 1-minute Passive Arming Mode: the countdown starts when the Ignition is turned off.
• To disarm the Starter Kill option in Active or Passive Mode, press the UNLOCK button on the
transmitter. The parking lights will flash twice. (If Remote Door Locks were installed, this will
also unlock the doors.) In Passive Mode, the system will automatically re-arm 1 or 3 minutes
after the doors were unlocked unless the ignition key has meanwhile been inserted in the
ignition switch.
AS-2510 TW User Guide P.11