User's Manual

With the Remote Valet activated, the
remote starter function will be disabled.
Valet Mode
The system can be placed in Valet Mode to disable the remote starting capabilities. If the vehicle
needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being
accidentally started by remote control.
To put the system i n t o Valet Mode:
1. Turn the ignition key to the IGNITION ON (RUN) position.
2. Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will turn ON and
remain lit.
3. The Transmitter will display the Valet icon .
To take the system o u t o f Valet Mode:
1. Turn the ignition key to the IGNITION ON (RUN) position.
2. Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will go OFF. The
Valet Icon will disappear from the Transmitter screen.
The valet button can only be used if the ignition key is in the IGNITION ON (RUN) position.
Panic Mode (this option must be programmed)
In an emergency situation, you can activate Panic Mode using the LOCK or UNLOCK button. This will:
• Shut down the engine,
• Unlock the doors (if UNLOCK is pressed)
• or lock the doors (if LOCK is pressed),
• Disarm the Starter Kill and
• Activate the horn for 30 seconds.
(See page 4 for a description of the Starter Kill option.)
To trigger Panic Mode:
• Press and hold the UNLOCK button for approximately 3 seconds until the horn starts to sound
and the parking lights flash: this will unlock the doors before the horn starts.
• Or press and hold the LOCK button for approximately 3 seconds until the horn starts to sound
and the parking lights flash: this will lock the doors before the horn starts.
Panic Mode will automatically shut off after 30 seconds.
Note: If you want to stop Panic Mode before the 30-second delay, press the LOCK or UNLOCK
button.
Caution: Panic Mode will be available only if Horn Confirmation was configured at installation.
Quick Lockout
TM
(Also called Secure Panic.) For fast protection, the system will LOCK all doors when you press
the brake pedal while the horn is activated and the system is in Panic Mode. (Quick Lockout
is only available when Panic Mode has been activated.)
Remote Door Locks Option
If your AS-2510 TW was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
To u n l o c k your doors and d i s a r m the system:
1. Press and hold the UNLOCK button for approx. 1 sec.
2. The parking lights will flash twice and the LED will turn off to confirm that the doors have been
unlocked and that the Starter Kill feature is disarmed if it was installed.
To l o c k your doors and a r m the system:
1. Press and hold the LOCK button for approx. 1 sec.
2. The parking lights will flash once and the LED will flash slowly to confirm that the doors have
been locked and that the Starter Kill feature is enabled if it was installed.
The horn will give one signal if configured at installation.
P.10 User Guide AS-2510 TW