R EVOLUTION OF POWER AXL AMPLIFIERS AXL1050.2 / AXL1650.2 / AXL3050.2 AXL1050.4 / AXL1450.4 / AXL4050.4 AXL1550.1 / AXL2550.
AXL SERIES AMPLIFIERS Congratulations on your purchase and thank you for supporting AUTOTEK! The AXL Series products have been designed to a very high level of performance, with features unavailable in similarly priced amplifiers. These amplifiers have variable crossovers built in, with added touches such as subsonic filter, bass equalization and a remote Level control module (some models) that allows subwoofer Level control from the drivers seat.
GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion.
AMPLIFIER FEATURE DESCRIPTIONS AXL AMPLIFIERS: Each multi channel model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation. The AXL1550.1 is stable at 4 & 2-Ohms while the AXL2550.1 is stable at 4, 2 & 1-Ohm. The input sensitivities for rated output powers are variable from 0.2 volts to 6 volts. All crossovers are fully variable in their respective ranges. Crossover filters are 12dB/Octave.
AXL1050.2 / AXL1650.2 / AXL3050.2 2 CHANNEL AMPLIFIER APPLICATIONS FULL RANGE STEREO This is the most basic application for the AXL Series 2 channel amplifiers. 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables. 2. Crossover Switch: The X-OVER switch must be in the FULL position. The MODE switch must be in the STEREO position. 3. Crossover frequency control checklist: N/A for full range operation. 4.
AXL1050.2 / AXL1650.2 / AXL3050.2 2-CHANNEL AMPLIFIER APPLICATIONS Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system In this application we will use a 2 channel amplifier for the high frequencies, and a second one for the low frequencies, or mono sub bass. Please consult the speaker specifications to determine maximum amplifier power requirements.
AXL1050.4 / AXL1450.4 / AXL4050.4 4 CHANNEL AMPLIFIER APPLICATIONS 4 CHANNEL FULL RANGE SYSTEM Here we show how to use the 4 channel amplifiers as straight forward discrete 4 channel full range units. Interconnect cable checklist: - Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables.
AXL1550.1 / AXL2550.1 1 CHANNEL AMPLIFIER APPLICATION Basic application These sub bass amplifiers can be used in any of the bi-amplification systems described in this manual, replacing the 2 channel amplifiers as per the illustrations. Interconnect cable checklist: Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables. Connect the LINE OUT to the inputs of the system highs amplifier. Use at least #12 gauge speaker wiring.
7 Yes
PART: A1112