Specifications

Important Safety Notes
Installation Handbook, AutroFlame X33AF PL Multispectrum IR Flame Detector, 116-P-X33AF/PL/DE, 2005-12-12,
Autronica Fire and Security AS
Page 10
4. Important Safety Notes
Do not open the detector assembly in a hazardous area when power
is applied. The detector contains limited serviceable components and
should never be opened. Doing so could disturb critical optical
alignment and calibration parameters, possibly causing serious
damage. This type of damage could be undetected and could result in
failure to see a fire and/or false alarm.
The wiring procedures in this manual are intended to ensure proper
functioning of the device under normal conditions. However, because
of the many variations in wiring codes and regulations, total
compliance to these ordinances cannot be guaranteed. Be certain that
all wiring complies with the NEC as well as all local ordinances. If in
doubt, consult the authority having jurisdiction before wiring the
system. The PowerLoop calculator must verify all wiring calculations.
A properly trained person must do the installation.
To prevent unwanted actuation or alarm, extinguishing devices must
be disabled prior to performing detection system tests or
maintenance.
Remove the protective cap from the front of the detector before
activating the system.
Observe precautions for handling electrostatic sensitive devices.