Specifications

Installation
Installation Handbook, AutroFlame X33AF PL Multispectrum IR Flame Detector, 116-P-X33AF/PL/DE, 2005-12-12,
Autronica Fire and Security AS
Page 14
5.3.2 Detector Mounting
Install the swivel mounting bracket assembly on the wall. The
installation surface should be free of vibration and suitable to receive
¼-inch (M6) screws with a length of at least 1 inch (25 mm), and have
sufficient capacity to hold the detector and bracket weight. Refer to
Figure 3 for dimensions.
Figure 3-Q9033B Mounting Bracket dimensions in inches (cm)
(See Figure 1 for correct detector orientation.)
5.3.3 Connections
X33AF PL
+–+–
1 3 18 15
In Out
PowerLoop
Figure 4 - If shielded cable is used for the PowerLoop, the shielding
should be continued.