Protecting life, environment and property PRODUCTS 2014 Autronica Fire and Security AS
PRODUCTS 2014 CONTENTS AUTROSAFE 4 IFG . . . . . . . . . . . . . . . . . . . . . . . . . 4 FLAME DETECTION . . . . . . . . . . . . . . . . . . . . . . . 42 Panels – AutroSafe 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Panel kits – AutroSafe 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switches . . .
PRODUCTS 2014 AutroSafe 4 IFG AUTROSAFE 4 IFG – the new generation interactive fire and gas detection systems Architectural example Our task was demanding, yet simple: Take the best fire and gas (F&G) safety system around and make it even better. The new and improved AutroSafe Integrated Fire and Gas (IFG) 4 is designed for the toughest requirements and expands the possibilities of a F&G detection system even further.
PRODUCTS 2014 AutroSafe 4 IFG Panel kits – AutroSafe 4 Panels – AutroSafe 4 Panel kits – AutroSafe 4 The AutroSafe 4 family consists of four different panel types. These are: An Al_Com+ stack can contain up to six loop driver modules (BSD-3xx). By using AutroFieldBus, an additional Al_Com+ stack (with up to six additional loop driver modules) can be added to the system. • Fire alarm control panel, BS-420. BS-420 is the main panel in the AutroSafe family.
PRODUCTS 2014 AutroSafe 4 IFG Printer Switches A network solution (AutroNet) with more than two panels demands the use of switches. Only Phoenix Ethernet switches are approved and supported by Autronica Fire and Security AS. The type and number of switches depends on the installation/network construction (no. of panels and distance between panels and switches) Image Image Part number Description* 116-5151-030.2127 FL switch SFNT 5TX 116-5151-030.2128 116-5151-030.
PRODUCTS 2014 AutroSafe 4 IFG I/O modules I/O modules Ensures loop communication • 4 0 Input module 8 0 Galvanically insulated inputs • 116-BSJ-310 Output module 0 8 Open transistor outputs • 116-BSS-310A Power supply module 4 0 • 116-BSS-311 Dual power monitoring module 4 4 Description 116-BSD-330 BS-100 loop driver module 116-BSE-310 Input module 116-BSE-320 Monitored outputs Autronica Fire and Security AS • Part number Monitored inputs – Maximum per panel – – Amplif
PRODUCTS 2014 AutroSafe 4 IFG OPC server Communication Image 12 OPC server Part number Description 116-BSD-321/1 AutroFieldBus protocol converter Interface between AutroFieldBus and Al_Com+. Enables communication between all Al_Com+ modules in an Al_Com+ stack connected to AutroFieldBus. The module enables AutroSafe DualSafety configuration, with both ordinary Al_Com communication and AutroFieldBus.
PRODUCTS 2014 AutroSafe 4 IFG Cabinets and racks Integrated fire and gas (IFG) modules Image Cabinets and racks Part number Description 116-BN-342/1 PowerLoop 4-20 mA input unit, rack mounted A general-purpose PowerLoop interface designed for third-party detectors connected to the AutroSafe IFG system. The unit has a 4-20 mA input galvanically isolated from the PowerLoop. 19” 3U rack version, bare PCB with 19” rack front panel, no DC/DC.
PRODUCTS 2014 AutroSafe 4 IFG Cables Batteries Cables Autronica Fire and Security AS offers accumulator batteries for every Autronica fire alarm system. Generally, 24 VDC back-up is used, this requires two batteries per panel. All batteries are sealed and can be placed in cabinets. Voltage Dimensions LxWxH Part number Description Weight 116-4160-001. FIAMM FG20721 12 V / 7.2 Ah 2,4 kg 79 x 56 x 106 mm 116-4160-002. FIAMM FG21803 12 V / 18 Ah 5,9 kg 181 x 76 x 167 mm 116-4160-003.
PRODUCTS 2014 AutroMaster Cables AUTROMASTER AutroMaster editions – a fully integrated safety and emergency management system AutroMaster ISEMS is the complete AutroMaster edition, including all functionality.
PRODUCTS 2014 AutroMaster Interface modules Software licences Interface modules Part number Description 116-PROG-AUTROMASTER-POG AutroMaster Oil & Gas Edition – For the Petrochemical, Oil and Gas market applications, support for the SIL2 approved AutroSafe IFG panel is mandatory. The AutroMaster Oil & Gas Edition is specially designed to use the AutroSafe IFG functionality to among other functions provide gas trending and LEL indication.
Hardware Part number Description 116-AUTROMASTER-PC-10 PC , desktop version, convertible minitower. Model subject to change without prior notice. 116-AUTROMASTER-RACKPC 19" rack mounted PC 116-5151-020.0210 Industrial PC w/SSD 116-5151-020.1951 19" standard LCD monitor (1280 x 1024 resolution) 116-5151-020.2405 24" widescreen LCD monitor (1920 x 1200 resolution) 116-5151-200.0023 20” monitor, console mounted, JH20T17 MMD 116-5151-017.0002 Keyboard - UK/English character set 116-5151-020.
PRODUCTS 2014 Loop units Input and output units Input and output units AutroSafe offers a wide range of input and output units for many different applications. The system features Exn-, Exia- and Exd approved input and output units for high risk applications. All input and output units feature automatic addressing and short-circuit protection.
PRODUCTS 2014 Loop units Input and output units Input and output units (cont.
PRODUCTS 2014 Loop units Control units Input and output units (cont.) Part number Description 116-BW-200/XX Disablement unit 2 For interfacing external IP54 units, clean contacts, IP67 alarm relays, etc. Zone 2 116-BW-201/XX Disablement unit 0 IP66 Zones 1 & 2 only 116-BW-202/XX Daytime/Nighttime unit 2 116-BW-203/XX Daytime/Nighttime unit 0 116-BU-200 Alarm controller unit 2 *: When two degrees of protection is given, the lowest is relevant when using the included glands.
PRODUCTS 2014 Loop units Detectors Detectors • • IP56 • • • • • • IP56 116-BHH-500/N • • • 116-BD-501/N • • • • • • IP56 116-BHH-500/S • • • 116-BD-55/XXXEXD • • • 116-BHH-500/S/EX • • • 116-BHH-500/S/N • • • IP56 • • Degree of protection • • SIL 2 certified • • Sealed unit 116-BD-55/ XXXEXDN High sensitivity 116-BD-501/EX Image IP66/67 • IP66/67 Notes For galleys/cold areas (-30 ºC) * Conventional ** Conventional 116-BD-505/140EXD • • • • •
PRODUCTS 2014 Loop units Manual call points and release stations Manual call points and release stations • • IP44D* IP44D* • • IP44D* 116-BF-501 Manual call point 116-BF-501/EX Manual call point 116-BF-501/N Manual call point 116-BF-502 Manual call point 116-BF-502/EX Manual call point 116-BF-502/N Manual call point 116-BF-503/0100 Manual call point 116-BF-503/EX/0100 Manual call point 116-BF-503/N/0100 Manual call point 116-BF-503/EX/0200 CO2 release station 116-BF-503/N/0200
PRODUCTS 2014 Loop units Alarm units Manual call points and release stations (cont.
PRODUCTS 2014 Loop units Alarm units Alarm units (cont.) – IP66 116-BBR-200/W Sounder • • • • 100 – IP42 116-BBR-230 116-BBR-230/IP 116-BBQ-130 Sounder Sounder Base sounder w/ beacon • • • *: Candela (c), Joule (j) 36 • • • • • 100 • • 100 • 90 – – 116-BBQ-230/IP Sounder/beacon 116-7770-009.0002 Roshni LP, shallow base • • Supported only by AutroSafe IP32C version 4.3 or later 116-7770-009.0004 Roshni LP, shallow base • Supported only by AutroSafe version 4.
PRODUCTS 2014 Loop units Alarm units Alarm units (cont.) Solista LX beacon, ceiling mounted, shallow base • • • • 116-4340-007.003 RoLP LX base beacon, wall mounted • • • • 116-4340-007.004 Symphoni LX base beacon, wall mounted • • • • • • • • • • • • • – W2.47.5 • – C-3IP33C Red flash 7.5 • – W2.47.5 • – W2.4- IP21C Red flash 7.5 • – W2.47.5 • 90 C-3IP21C Red flash 15 Degree of protection 116-4340-007.
PRODUCTS 2014 Loop units Service tools for detection loops MEDC beacons, sounders, and combination units Accessories for loop units (cont.) Autronica Fire and Security AS distribute MEDC equipment. Please contact us with your request. These products are produced according to customer specifications. Door magnet Image Part number 116-6731-017.0002 116-6731-017.0005 Description Door magnet armature. Type AG w/adjustable socket. For use with part no: 116-6731-017.0005 Door holding magnet.
PRODUCTS 2014 Flame detection Flame detectors Flame detectors All flame detectors have 4 x M25 cable entries, unless otherwise specified. Swivel mount, glands and blind plugs are not included. All detectors have an ambient temperature range of -55°C to + 60°C for T6 and -55°C to + 75°C for T5, unless otherwise specified. Degree of protection all detectors and cameras: IP66 SIL 2 approved With HART protocol Cert.
PRODUCTS 2014 Flame detection Cable glands/Blind plugs Flame detectors (cont.) With HART protocol SIL 2 approved Cert. -55 °C to +125 °C for T4 For PowerLoop Combination unit with camera av. Addressable (built-in BNB-300) Aluminium housing Stainless steel housing Image Cable glands/Blind plugs • • Part number Description 116-5861-011.4391 AutroFlame X33AF multisp. IR 116-5861-011.4392 AutroFlame X33AF multisp. IR • • 116-5861-011.4393 AutroFlame X33AF multisp. IR • • 116-5861-011.
Test equipment Part number Description 116-006439-004 W8067S Long range test lamp IR/UVIR, (non-EX) 116-004000-006 W867C Portable test lamp 220 V, UV, UV/IR & Single IR 116-007255-001 Q1201C Laser holder for AutroFlame X33AF, UV/IR and UV flame detectors 116-006097-001 Laser aimer (non-EX) for AutroFlame detectors incl.
PRODUCTS 2014 Gas detection Gas detectors Gas detectors Autronica delivers the performance, quality, and reliability you can depend on to keep you safe and satisfied. AutroPoint HC200 • • 116-5861-011.5101 AutroPoint HC200 • • 116-5861-011.5102 AutroPoint HC200 • • 116-5861-011.5200 AutroPoint HC200 • • 116-5861-011.5201 AutroPoint HC200 • • 116-5861-011.5300 AutroPoint HC300PL • • 116-5861-011.
PRODUCTS 2014 Gas detection Display units Toxic gas detectors Display units Autronica provides toxic gas detectors for a wide range of gases. These detectors must be combined with a toxic gas sensor module, listed below. The detectors each have a 4-20 mA output and 2 x M25 cable entries. HART protocol is included.
PRODUCTS 2014 Gas detection Accessories Accessories Toxic gas transmitters and termination boxes GTX Transmitter 116-226365-603 116-009910-004 116-009958-002 STB Termination Box • • NTM1B10W NTMOS H2S Sensor (0-100 ppm) GDTB Termination Box Eex d certified 116-009480-004 Stainless steel housing Description NTMOS Part number Electrochemical Image • • • • • • • • • • Part number Description 116-000912-006 Q912 Duct Mount Kit Duct mount assembly for point gas detectors AutroPoi
Calibration kits Part number Gas type Concentration Notes 116-006468-001 Methane CH4 50 % LEL AutroPoint HC200/-300 116-007098-005 Hydrogen Sulphide H2S 50 ppm 12 x ampoules, NTMOS detectors 116-010274-001 Hydrogen Sulphide H2S 10 ppm GT3000 series 116-010274-002 Hydrogen Sulphide H2S 25 ppm GT3000 series 116-010274-004 Chlorine Cl2 5 ppm GT3000 series 116-010274-005 Ammonia NH3 50 ppm GT3000 series 116-010274-006 Ammonia NH3 250 ppm GT3000 series 116-010274-008 Hydrogen H2
PRODUCTS 2014 Other detectors Alarmline linear heat detectors Alarmline linear heat detectors OTHER DETECTORS Part number Description 116-5843-005.0001 Alarmline analogue cable, K82017 – completing the fire detection system 116-5843-005.0003 Alarmline analogue cable, bronze, K82078 116-5843-006.0001 Interface unit (K82012F) for high-resistance sensor Alarmline linear heat detection (LHD) is a cable-based system providing economical temperature monitoring at the precise point of risk.
PRODUCTS 2014 Other detectors Accessories Aspirating detectors 450 m² 1 10 4 1 Relays 450 m² 100 Alarm levels 25 m 4 Max. sampling holes 0,0015–25% 200 m 2000 m² 500 m² Sampling pipe inlets AutroSense Micra 25 0,0015–25% Max. coverage BS6266 (Hot Wire Test) 116-5861-018.1007 AutroSense 200 Max. coverage (FG) 116-5861-018.2000 Description Max. length piping Part number Sensitivity (obsc./m) Image Accessories 5 2 Part number Description 116-5861-018.
Beam detectors Image Detection Degree of distance protection Part number Description 116-5861-021.1001 AutroBeam 100, transmitter (Tx) 5 – 150 m IP40 116-5861-021.2001 AutroBeam 100, receiver (Rx) 5 – 150 m IP40 116-5861-023.5101 FireRay 5000-101 Auto aligning infrared optical beam detector. Transmitter/receiver in the same housing, plus reflector. 5 – 50 m IP54 116-5861-023.5102 FireRay 5000-102 Auto aligning infrared optical beam detector.
PRODUCTS 2014 Omicron systems Gas sampling system – OGS 3.1 and OGS 3.11 Gas sampling system – OGS 3.1 and OGS 3.11 OMICRON SYSTEMS For total solutions in gas sampling Omicron gas sampling system OGS 3.1 is our advanced model for special requirements. Different models and options cover most applications you will find onboard any kind of tankers with special needs. All delivered parts are completely assembled ready for interconnection to onsite application. OGS 3.
PRODUCTS 2014 Omicron systems Water ingress system – OAS WI Direct gas sampling system – OGS 2.1 sampling Water ingress system – OAS WI For high level and overfill Gas detection in harsh areas such as shale shaker rooms etc. The Omicron water ingress system has been specially designed and manufactured for detecting the presence of water in the inner bottom in any holds reaching a height of 0,5 m and another height of not less than 15 % of the depth of hold but not more than 2 m.
CONTACT INFORMATION HEAD OFFICE STAVANGER, NORWAY Autronica Fire and Security AS Div. Oil & Gas Lagerveien 24 NO-4033 Stavanger Norway Phone: +47 51 84 09 00 Fax: +47 51 84 09 99 UK & IRELAND Autronica Fire and Security AS Div. Oil & Gas Lagerveien 24 NO-4033 Stavanger Norway Phone: +47 51 84 09 00 Fax: +47 51 84 09 99 MIDDLE EAST/SAUDI ARABIA UTC Fire Safety Middle East P.O. Box 30791 Dubai United Arab Emirates Tel. +971 44 199 306 Fax. +971 4 454 1391 Mob.
SOME CAN TRULY SAY THEY ARE WORLD-LEADING WHEN IT COMES TO SAFETY. WE CAN TRULY SAY WE PROVIDE IT. Oil and gas installations in the North Sea are among the safest in the world, and we are bold enough to take some of the credit. For years we have been a preferred supplier of fire and gas safety systems in the petrochemical, oil and gas market. We make world class products, but believe that even the very best can get better.