Specifications

Autronica Fire and Security AS Autronica Fire and Security AS
2524
PRODUCTS 2014
Loop units
Input and output units
We provide a wide range of loop units for our fire detection systems. Our detectors, manual call points, I/O units, control units
and alarm units are developed and approved according to European directives (CPD) requiring EN 54 compliance and other
appropriate worldwide regulations.
The loop units are available both with and without SelfVerify function. SelfVerify solves all issues of manual maintenance,
leaving time consuming and costly physical testing no longer necessary. With AutroSafe SelfVerify®, the system checks all
detectors, interfaces, connections and cables – from detector chamber to alarm output – every single day.
Not only does the system test whether a detector is capable of provoking an alarm, it even verifies the sensitivity of every
detector with a calibrated signal. The SelfVerify system ensures that each detector always responds to the correct alarm level.
In the event of irregularities, the display on the operating panel will accurately pinpoint the source of any problem.
SelfVerify ensures that you have the safest and most reliable fire safety system available – a system ensuring optimal
detection.
LOOP UNITS
– a wide range covering your basic fire detection needs
Input and output units
AutroSafe oers a wide range of input and output units for many dierent applications. The system features Exn-, Exia- and Exd approved input
and output units for high risk applications. All input and output units feature automatic addressing and short-circuit protection.
Image Part number Description
Configurable input
Monitored input
Monitored output
Inputs/outputs
Requires external PSU
SelfVerify
For use in EX areas
Degree of protection*
Notes
116-BN-180 AutroKeeper • IP30
Use two units to access
one loop from two loop
controllers.
DIN rail mounting in
cabinet.
116-BN-201 Monitoring unit • • 1/0
IP54
IP67
For external units
116-BN-221/01
Extinguishing
control unit
• • 2/1 • IP67
116-BN-221/02
Output unit with
7 A relay
• 0/1 • IP67 Loop controlled FAD unit
116-BN-300 Input unit • • 1/0 •
IP54
IP67
For interfacing external
units, clean contacts,
alarm relays, etc.
*: When two degrees of protection is given, the lowest is relevant when using the included glands. To achieve the highest, special
IP67 glands must be ordered (see page 41)
SelfVerify ensures
optimal detection