Specifications

Autronica Fire and Security AS Autronica Fire and Security AS
1312
PRODUCTS 2014
AutroSafe 4 IFG
OPC server
OPC server
Part number Description
116-AS-OPC-SERVER/CD1
AutroSafe OPC server CD V1.2 incl. access code for access level 1. Includes read access to all status
information for detectors, output and alarm devices. This level of license will also make it possible to
send (write) Silence, Reset and SetTime commands to the AutroSafe system. Within this level you can
also Disable/Enable detectors.
116-AS-OPC-SERVER/CD2
AutroSafe OPC server CD V1.2 incl. access code for access level 2. Includes all functionality in level
1, plus the possibility to Activate/Deactivate and Enable/Disable outputs and alarm devices via OPC
write commands.
116-AS-OPC-SERVER/CD3
AutroSafe OPC server CD V1.2 incl. access code for access level 3. Includes all functionality in level 1
and 2. This level also provides additional information for points, for example AMEAS, Temp, Smoke,
Alarm limits and Engineering values.
Communication
Image Part number Description
116-BSD-321/1
AutroFieldBus protocol converter
Interface between AutroFieldBus and Al_Com+. Enables communication between
all Al_Com+ modules in an Al_Com+ stack connected to AutroFieldBus. The
module enables AutroSafe DualSafety configuration, with both ordinary Al_Com
communication and AutroFieldBus.
116-BSL-310
AutroSafe communication module, serves as an interface for the common internal
communication line between all the dierent I/O modules. Part of the fire alarm
control panel.
116-BSL-321
Multi mode fibre optic converter
Amplifier for AUTROLON/AutroFieldBus networks, which acts as a fibre optic modem.
The converter ensures reliable communication for distances of up to 3000 m. Uses
multi-mode (62.5/125 µm or 50/125 µm) fibre-optic cable. Degree of protection: IP20
116-BSL-322
Single mode fibre optic converter
Amplifier for AUTROLON/AutroFieldBus networks, which acts as a fibre-optic modem.
The converter ensures reliable communication for distances of up to 15000 m. Uses
single-mode (9/125 µm) fibre-optic cable. Degree of protection: IP20
116-BSL-325
AUTROLON/AutroFieldBus communication amplifier
Amplifier for communication signals on networks. The amplifier ensures reliable
communication in systems where there is great distance between the system panels,
and in applications where there are many panels. The amplifier increases maximum
cable length from 1000 m to 2800 m. Degree of protection: IP20
116-BSL-336
Voyage data recorder interface
Allows AutroSafe fire and gas detection systems data to be logged on voyage data
recording systems. Converts standard AutroSafe AutroCom messages to NMEA-0183
standards-compliant strings, allowing events to be written to the VDR. Degree of
protection: IP20
116-BSL-337
AutroSafe BU-70 interface module
Enables the connection of BU-70/BU-100/BU-101 to AutroSafe. This is a simple, cost
eective way to upgrade BS-100 systems to AutroSafe. The RS232/20 mA current
loop converter BSL-12/2 must be used to convert RS232 to 20 mA current loop
communication.
Degree of protection: IP20