User's Manual

5
5
3. To pair a second Bluetooth-enabled
device, press and hold VOL+ for
3 seconds to enter pairing mode.
The headset will disconnect from
the first Bluetooth-enabled device
automatically. Pair and connect with
the second device, then manually
connect the first device according to
its pairing instructions.
4.
Press and hold the Multifunction
button for 2 seconds to turn off the
headset. The Indicator flashes red
twice.
n Note:
 If your Bluetooth-enabled devices
are out of connection range and
disconnect with the headset,
move back within 10 minutes to
reconnect automatically.
 To avoid scratching your skin, do
not press the Multifunction button
while putting on the headset.