User`s manual

AuviTran AVS-Monitor User’s Manual 49
9.2 Menu
Menu is organized that way:
Menu
Submenu
Function
File
New
Erase current configuration from memory, and start new session
Load…
Load a configuration previously saved to a file
Save
Save current configuration to opened file
Exit
Exit ES-Editor
Help
About
Display ES-Editor version
9.3 How to build a new configuration
Building a configuration is done via drag and drop. User selects which device to add to your configuration from Device
selector, and drags it to right place on the Network building side. Device will be automatically added to the configuration.
If device is dragged over an empty place, a new network will be created with device set as Primary Master.
In the bottom part of the interface, user can:
 Change device MAC Address
 Change device alias
9.4 How to edit a configuration
Editing a configuration is done by right clicking on devices, and using drag and drop. After successful loading a previously
created file, Network building will be updated with data contained within the file.
Using drag and drop, user can move part of created EtherSound network from one place to another.
Right clicking on device will allow user to delete selected device, or delete selected device and whole its child.
9.5 How to use generated configuration
After successful building or editing configuration, user has to save it into a file by using the command “Save” from the file
menu.
Afterwards, this configuration can be imported in AVS-ESMonitor both in online or offline mode.
Note that AVM500-ES exists in one single device with all ports associated, and as individual devices with dissociated port.
AVM500-ES cannot be moved in architecture.