User`s manual

AVY16-ES100 User’s Manual AuviTran 9
This is the classic Daisy-chain configuration. The computer on which ESMonitor was
installed is connected to the “IN Port” of the first device in the network, the primary
master (here, an AVY16-ES100). A primary master is the first EtherSound-based device
of an EtherSound network which has its “IN Port” not connected to another EtherSound
device.
After running ESMonitor, Select an AVY16-ES100 device on the device list or tree list (i.e.
the list of devices which are automatically discovered by ESMonitor and displayed in the
left part of the ESMonitor Window).
When a device is selected, you can access to 3 specific pages via tab selection on the
right part of the screen. These pages are:
• The Properties page
• The Net patch or I/O Patch page
• The Control page
14-1- AVY16-ES100 Properties Page in ESMonitor
If the properties page is selected, ESMonitor will display the following information:
Here you can define a name
for your AVY16-ES100
For Audio routing part, AVY16-ES100 is seen by default as a bidirectional EtherSound
device with 16 inputs and 16 outputs
but could be set as 8 inputs and 8 outputs using
the “YGDAI mode” buttons in the Control page.
You must refer to ESMonitor documentation for Net patch or I/O routing management.