HDW100 1080P Wireless HDMI Extender User Manual
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built‐in cabinet, or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, or similar items.
Table of Contents Introduction ................................................................................................. 2 Overview......................................................................................................... 2 Features .......................................................................................................... 2 Package Contents ........................................................................................... 2 Application ........................
Introduction Introduction Overview The 1080P wireless HDMI extender set extends HDMI signals from a source device to a display device wirelessly up to 200 meters or through a Cat 5e/6 cable up to 120 meters. Great for homes and offices. Features Transmits 1080P HDMI signals up to 200 meters wirelessly. Transmits 1080P HDMI signals up to 120 meters through a Cat 5e/6 cable. HDMI loop‐out on the transmitter to connect to a local display, allows easy monitoring of the source signal.
Introduction Application (1) 1‐1 Wireless Transmission (2) 1‐1 Wired Transmission www.avaccess.com 3 info@avaccess.
Panel Layout Note: "Work Mode" Fig 1 Switch Settings Fig 2 Transmitter Wireless Wire Receiver Wireless Wire Panel Layout Transmitter Receiver www.avaccess.com 4 info@avaccess.
Installation Installation The device can be placed on a stable surface. To install the device to a suitable location, perform the following: 1. Position and install the mounting brackets using the mounting screws provided. 2. Repeat above step for the other side of the device. 3. Attach the brackets to the surface you want to hold the device against using the screws (not included). www.avaccess.com 5 info@avaccess.
Installation Specifications Technical Input A/V Port Input Resolutions Output A/V Port Transmitter: 1 x HDMI Receiver: 1 x LAN, 1 x WLAN Up to 1080P@60Hz Transmitter: 1 x HDMI, 1 x LAN, 1 x WLAN Receiver: 1 x HDMI Output Resolutions Up to 1080P@60Hz Compliance HDMI 1.3, HDCP 1.
FAQs FAQs 1. What should I do when Link LED is on, but there's no video output on the remote display? • Check and ensure the Work Mode switches on both transmitter and receiver(s) are set to the same positions (both at "Wireless" or "Wire"). • Check and ensure the HDMI source is powered on, and the transmitter's HDMI In LED is on. • Connect the HDMI source device directly to the display to see if there's signal output. 2.
FAQs • Decrease the distance between the transmitter and receiver toensure it is within the available transmission range. • Remove other wireless signals and move any obstacles that are blocking the signal line‐of‐sight. 3. Why does the IR remote controller seem not sensitive enough? Avoid to press and hold the IR remote controller's buttons. Try to short press them intermittently instead. www.avaccess.com 8 info@avaccess.
FCC Statement Warranty Products are backed by a limited 1‐year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable. 1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3.
IC Statement installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Distance Statement may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
AV Access Technology Limited V1.0.