Specifications

58
Motorola Lifestyle 28.8, Dataplex Multispeed V.32bis, Netcom Smart modem 56, Acer AME-
MU00, ABC 56K V.90, and other Hayes and Bell 103 compatible modems.
Installing EasyLoad on your Computer
Insert the EasyLoad diskette in the floppy drive A (or B) and type ‘A:’ (or ‘B:’). At prompter
‘A:>‘ type ‘AVGAD217’ (AVGAD217 is the file name). The installation program will guide you,
and will install EasyLoad automatically by creating a new directory on your hard drive, called
AVGAD, or a name of your choice.
To start your EasyLoad: at the prompt ‘C:\AVGAD>‘ type ‘ESAV’.
Important! The most current updates and EasyLoad features are in the READ ME file.
Read it carefully before using the EasyLoad.
Factory default access code is AVGAD123. Change it when installed. Update it periodically.
The first time you run the program, missing “Files Message” displayed (the database), answer
‘Yes’ to create them.
The main EasyLoad menu contains seven selectable fields. Enter those fields by using the
navigation arrows on your keyboard, or by typing the field number.
Using a mouse is highly recommended. The keyboard can also be used to navigate through the
fields, e.g. Move from field to field using arrows (when possible), the TAB key (forward), SHIFT
+ TAB (backward), ALT key + Highlighted letter. Confirm input in text fields by hitting the
ENTER (return) key. In the main menus, you may type the highlighted digits for fast access.
Step 1: Configuring your Modem
Configure your communication port using the SET-UP entry from the main menu (entry 7).
For DOS modems the required COM/IRQ combinations are:
COM1, COM3 - IRQ 4
COM2, COM4 - IRQ 3
To initialize the modem properly, use the Auto Detect option before trying to CONNECT, ignore
errors that are reported during initialization.
The integrated modem in latest (version 2 and later) EasyLoader control panels operates in
Answer mode.
The dial suffix from the Set-Up screen is no longer relevant! The modem will be silent until the
control panel answers the call, then the Modem noise is on (the carrier detection procedure).
After connection made, the modem's speaker will turn OFF. In this operation mode, you will be
able to hear the call progress tones (dialing, ringing or busy). If the phone line is busy, the program
will notify you and will disconnect the telephone line.
To get an outgoing telephone line from an extension, fill in the PABX entry on the set-up screen.
Type the digit needed for the outgoing line (usually 0 or 9) followed by a W. The ‘W’ will pause
the modem until it gets the second dial tone (from the outgoing line) thus avoiding blind dialing.
Troubleshooting: Where telephone system installed, local PABX stations (telephone system) are
fitted with internal modems for remote set-up. These stations, much like the control panels,
activate their modems in ORIGINATE mode.