Specifications

9
F i g u r e 2 . 5 : W i r i n g k e y p a d t o c o n t r o l p a n e l
2.4 Siren Wiring
The control panel contains single siren outputs, protected by Electronic Fuse.
Siren should be outdoor type with a 12V DC, 1A or optional (requires programming)
speaker siren with minimum power of 15W, 8 Ohms Impedance.
Enclose the siren in a metal housing, with anti-tamper switch protection.
F i g u r e 2 . 6 : W i r i n g s i r e n s t o c o n t r o l p a n e l
Warning, siren/s current should not exceed 1.0 Ampere
Bell mode is factory default; in Bell mode a 12V DC siren is required, such siren which
contains sound driver or electronic module that operates on 12V.
The alarm issued by the siren differs according to the type of zone.
Bell Mode converts Siren outputs into 13.6V DC outputs (no sound is issued).
Bell mode is applicable for driving self-powered sirens or bells, or combined sirens and
strobes.
13.6V DC is issued at Bell mode. It’s recommended to use Bella sirens series.
In Bell mode, connect only sirens, which contain sound driver or electronic modules.