Tus neeg siv phau ntawv

INTRODUCTION
Congratulations on your purchase of the OH6 ONE-HANDER In-Wall/In-Ceiling Speaker System.
Proper handling, installation, and operation of this speaker will provide a lifetime of durability and
high-end performance.
It is important that you follow all installation and mounting instructions and recommendations in this
manual closely and carefully to ensure optimal performance operation and longevity.
FEATURES
• 6.5″ In-Ceiling Speaker
• Quick EZ Mounting System
• 1″ Adjustable Neodymium Tweeter
• Elaborate Crossover Network With Polyswitch Protection
• Bass & Treble Tonal Control Adjustment Switches
• Paintable Anti-Rust Magnetic Grilles
• Gold Plated Spring-Loaded Terminals
• Carbon Fiber Woofer Cone
• Edgeless Design for Better Aesthetic and Reduced Visibility
• Rough-in Kit Ready
SPECIFICATIONS & DIMENSIONS
Frequency Response 50Hz–15kHz
Sensitivity 87dB 1W/1M
Impedance 8-Ohm
Power Handling 150 Watts Max
Grille Finish White/Paintable
Enclosure Material/Type Impact resistant ABS plastic
Driver Components
2-way system using one 1″
adjustable silk dome neodymium
tweeter and one 6.5″ carbon fiber
midrange/bass driver
Outer Diameter 9.05″ (230mm)
Cut Out Diameter 7.87″ (200mm)
Mounting Depth 3.14″ (80mm)
Grille Diameter 9.13″ (232mm)
Magnet Diameter 3.34″ (85mm)
Speaker Weight 3.36 lbs (1.52 kgs)
Specifications are subject to change without notice.
OH6 One-Hander Manual 3