User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 9
2.3 WIFI connection to LAN
After logging into the camera with a wired connection you can enter the WiFi settings.
Figure 5
1. Click ‘Network’, then click ‘Wireless Settings’
2. Click ‘Scan’ button
3. Click your Wi-Fi hotspot SSID
4. Click ‘Using Wireless Lan’
5. Input your Share Key
6. Click “Submit” button, the device will start rebooting
7. While rebooting, unplug the Ethernet cable,
Tip: Router may assign different IP address for Ethernet cable or Wi-Fi connection
8. Use the IP Camera Search Tool to search for the camera, highlight the Device name,
and click ‘Browse’ .
Note：When the device is connected to both WIFI and cable, it will connect to the wired
network.