User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 10
2.4 Connection to WAN
To view the camera from internet, you must configure port forwarding on your router.
Figure 6
An example of port forwarding.
Figure 7
Steps:
1) After logging in to the router, go to “Port Forwarding”
2) Choose “Add custom Service”
3) Input the camera’s http port
4) Input the IP address of the camera and click “Apply”
5) After finishing the port forwarding, you can use WAN IP address of router and the
http port of the camera to view the camera with a remote device as seen in figure 6.
Note: Routers manufacturers may have a different user interface and method of
configuring port forwarding. Please refer to the user manual of your router.