User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 12
3） Multi Channel displaying area
If users added multi channel（refer to 3.4.2）, when changed to 4-Ch, 9-CH, it will show
other devices automatically.
If you select one device, you can operate it with these keys:
These buttons mean play video, stop video, monitor, talk, record and snapshot. You can
click these buttons to start corresponding function.
Note: If you want to click this button
to record the video,
please go to Advanced—Other Settings to set the Record Path first.
Figure 9 Other settings
4） PT and video control
In Pan/Tilt control area, user can control the lens position according to the arrow:
up, down, left, right, middle, horizontal cruise, vertical cruise, and stop etc.
Means alarm output I/O is normally open or normally closed.
User can also set frame rate, resolution, brightness, contrast and other parameters of the
device.