User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 15
3.3 Alarm Settings
3.3.1 Alarm Settings
Figure 16 Alarm settings
1） Events
¾ With Motion Detection armed if there is any motion, it will trigger an alarm. For
motion detect sensitivity, the larger the value, the more sensitivity.
¾ With I/O Input armed, I/O Input can be enabled if external alarm detector is
connected. If the external alarm is an always on switch signal, please choose “open”.
If the external alarm is always off switch signal, please choose “close”.
¾ With Audio Detection armed, if there is any sound, it will trigger an alarm. For Sound
sensitivity, the larger the value, the more sensitivity.
2） Notifications
After triggering an alarm, you can adopt several alarm modes:
¾ Trigger on Alarm: The IO interface for alarm signal output will switch the relay on
and the external alarm will be activated；
¾ Send Mail on Alarm: The camera will send alarm info by email to a configured email
address.
¾ Upload Image to FTP: The camera will send alarm pictures to the configured FTP
server, user can also set the interval time between two pictures；
¾ Warning sound on View: When the camera detects an alarm, you will hear an
audible beep when viewing the camera beeps from the computer；
¾ Local Record on View: Once the camera detects an alarm, it will start recording and
store the video in the configured folder on the computer.