User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 18
3.3.3 FTP Service Settings
Figure 19 FTP service settings
When configured and in the alarmed state, the camera will snap and send an image to
the configured FTP server. After configuring, click “Submit” to save these parameters,
and then you can click “Test” to check if the settings are successful.
Note：For using the FTP function, you need to configure a user with authority to write to
and create submenus on the FTP server.
After correctly setting the FTP server, you can use the “upload Image Periodically”
function. The device will send image to FTP server in preconfigured interval . A file name
can be specifies and each subsequent image will overwrite the previously saved Image.