User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 22
3.5.3 Date &Time Settings
If the device is connected to the Internet, you can enable the NTP server to correct the
time and to select the correct time zone. Otherwise you can use the PC’s time. This time
is used for timestamps on videos and snapshots.
Figure 26 Date and time settings
3.5.4 Upgrade Firmware
Figure 27 Upgrade firmware
The camera runs two kinds of firmware, one is System firmware, and the other is Web UI
firmware. They can be upgraded when necessary.
3.5.5 Factory Settings
Clicking “Factory Settings”, will open up a dialogue box to confirm if you really want to
restore the camera to factory defaults. After confirmation, the system will restore the
factory default settings and reboot.
3.5.6 Log
Viewing the log will show when and by what device has accessed the camera.
Figure 28 Log