User manual

If after consulting the user manual you cannot solve the problem, please call our support
center about the solutions. We reserve the right to update the manual content without notice.
1. Installation Environment
, Keep away from high temperatures, heat source, direct sunlight, rain or dust.
, Avoid using in damp environments, the range for operational humidity is below 85%RH.
, Avoid using in very hot and very cold environments, the reference range for operational
temperatures is -10°c ~ +50°c or 14°f ~ 122°f
, Please install horizontally or on wall mounting, avoid vibrating locations.
2. Transport and Handling
, The package is well-designed to ensure camera safety during the delivery, so please do
not change the packaging.
, Do not move the IP cameras from overheated to supercooled condition
frequently,
otherwise it will frost and shorten the service life.
, Do not move the item when is power on, otherwise the main board might be damaged.
Notice:
1. Please check the power supply before it is used.
2. Do not allow the camera to get wet. The camera should not be used outdoors.
3. Be careful not to drop the camera or subject it to strong impacts or shocks.
4. Do not directly touch the optical components for the image sensor, if necessary, please
use a clean cotton cloth with alcohol and wipe the dirt gently;
5. Do not aim the camera directly into the sun or at other intense light sources that could
affect the image quality or shorten the service life for the image sensor.
6. Keep away from laser when in use, the image sensor can be damaged.
7. If the equipment is not working properly, please contact the customer service center, do
not disassemble or modify the equipment in any way. （Problems caused by
unauthorized modification or repair should be at your own risk.）
Statement
Notice