User manual

http://www.avacomtech.com
Avacomtech Inc.
Page 7
Figure 2
1) Click ‘Search (F3)’;
2) Choose the camera then click “Browse (F4)”. Then you can run the web browser,
enter user name and password and login to the IP camera to view the video.
If the camera and the router are not in the same sub-net, you need to setup the IP
address manually:
3) Enable “set IP automatically” or change the IP address manually. Http port should be
a number between 80~65535;
4) Enter user name and password for the device, the default is “admin” and “123456”;
5) Click ‘update’;
6) After updating successfully, click “Search (F3)”, choose the device again and click
“Browse (F4)”. Then you can run the web browser, enter user name and password
and login to the IP camera to view the video, example see figure 3.
Note：
1) Please check carefully the “Local PC information” in top left corner of the interface, if
the computer has several network cards, please select the one you are using.
2) If you installed firewall software in your PC, when you run the M10 Search_en.exe, it
may pop up a window to say “whether you want to block this program or not”, then
you should choose not to block。
Figure 3
We suggest using IE browser to view the video （it can provide more functions）, but user
needs to install video player before viewing the video. Click “download and install player
(first use)” link, it will popup a dialogue box as Figure 4, click Run, it will download player
and install automatically.