User Manual

AW2400mTR User’s Manual
PAGE 6
Technical support [phone] www.avalanwireless.com
Browser Interface Conguration
1. Digital conguration is done by means of the AW2400mR’s built in browser interface. It
should be powered on and connected at least temporarily to a network containing a computer
that can run a conventional web browser.
2. Download the AvaLAN IP Discovery Utility from our website and extract
ipnder.exe from the zip archive, placing it on your desktop or in a convenient folder.
http://www.avalanwireless.com/ipnder/ipnder.zip
Note that this utility only runs on MS Windows, not linux or MAC. If you must use a non-
Windows computer for conguration, make sure your subnet mask allows your computer to
see 192.168.17.17. Connect to that default IP address with your web browser, continuing the
setup procedure with step 6.
3. Run the IP Discovery Utility, ipnder.exe and you should see a window similar to this:
The AW2400mR should appear in the list at the default IP address of 192.168.17.17. If it does
not, click “Search” to regenerate the list. If it still does not appear, you have a connection
issue and need to re-examine the cabling or you may have a rewall issue on your computer.
4. Double click the list item that refers to the AW2400mR being congured. You should see a
second window that is similar to this:
The information on the left is the current status of the radio, while the boxes on the right al-
low you to change it. It is important that the IP address of the AW2400mR is in the same subnet
as your computer. For example, if the subnet mask is 255.255.255.0 ( a class C network), the
rst three number groups of the IP address must match. Choose your desired parameters and
click “Apply.”