User's Manual

LED display:
The AW5800m has a 16 LED display to display the status of the device.
LED Name Function Color
1 Power Unit has power and has successfully booted. Red
2 RF TX Radio transmission is occurring. Green
3 RF RX Radio reception is occurring. Green
4 Eth Link The Ethernet Port has a valid Ethernet connection Green
5 1 (channel)
6 2 (channel)
7 4 (channel)
8 8 (channel)
9 16 (channel)
10 32 (channel)
By adding the
values that are
lit, the user
can determine
the current
radio channel.
1 5728.125 Mhz
2 5730.208 Mhz
3 5732.292 Mhz
4 5734.375 Mhz
5 5736.458 Mhz
6 5738.542 Mhz
7 5740.625 Mhz
8 5742.708 Mhz
9 5744.792 Mhz
10 5746.875 Mhz
11 5748.958 Mhz
12 5751.042 Mhz
13 5753.125 Mhz
14 5755.208 Mhz
15 5757.292 Mhz
16 5759.375 Mhz
17 5761.458 Mhz
18 5763.542 Mhz
19 5765.625 Mhz
20 5767.708 Mhz
21 5769.792 Mhz
22 5771.875 Mhz
23 5773.958 Mhz
24 5776.042 Mhz
25 5778.125 Mhz
26 5780.208 Mhz
27 5782.292 Mhz
28 5784.375 Mhz
29 5786.458 Mhz
30 5788.542 Mhz
31 5790.625 Mhz
32 5792.708 Mhz
33 5794.792 Mhz
34 5796.875 Mhz
35 5798.958 Mhz
36 5801.042 Mhz
37 5803.125 Mhz
38 5805.208 Mhz
39 5807.292 Mhz
40 5809.375 Mhz
41 5811.458 Mhz
42 5813.542 Mhz
43 5815.625 Mhz
44 5817.708 Mhz
45 5819.792 Mhz
46 5821.875 Mhz
47 5823.958 Mhz
48 5826.042 Mhz
49 5828.125 Mhz
50 5830.208 Mhz
51 5832.292 Mhz
52 5834.375 Mhz
53 5836.458 Mhz
54 5838.542 Mhz
55 5840.625 Mhz
56 5842.708 Mhz
57 5844.792 Mhz
58 5846.875 Mhz
Green
11 Link Quality
Meter
Excellent link quality –
No retransmissions
Green
12 Link Quality
Meter
Very good link quality –
Few retransmissions
Green
13 Link Quality
Meter
Good link quality –
Occasional retransmissions
Amber
14 Link Quality
Meter
Fair link quality –
Some retransmissions
Amber
15 Link Quality
Meter
Poor link quality –
Many retransmissions
Red
16 Link Quality
Meter
No link quality
No link available
Red
Troubleshooting:
See the online installation tutorial and FAQ at www.avalanwireless.com
No Power LED:
Check the power connections.
No Radio Link LED:
The radio is looking for its matched partner. If both units are powered up and the Power LEDs
are active they may be too far away to create the radio connection. Try other locations that
may have a less obstructed path or try to reorient the antennas.
Directional antennas get their best range when they are oriented to point directly at each
other with the antenna elements oriented in the same plane (eg. vertically or horizontally)
Radio LINK LED on but Link Quality Indicator is low:
The units may be too far away to create a good radio connection. Try other locations that
may have a less obstructed path or try to reorient the antennas.
No Ethernet LINK LED:
Check your network connections.
Installing Multiple systems in close proximity:
See the online installation tutorial and FAQ at www.avalanwireless.com
Still not working?
Temporarily use an Ethernet cable to see if the network is working over a wired connection.
If an Ethernet cable does not work then the problem is with the network.
Support Email: [e-mail] Support helpline: [phone]