User's Manual

MOD090-HP
User’s Manual
PAGE 12
Technical support [phone] www.avalanwireless.com
UART Command Set
Command Byte - HEX Command
0x00 getStatus
0x01 getNetworkKey
0x02 getPrivateKey
0x03 getDeviceID
0x04 getStats
0x05 getVersion
0x06 getCong
0x07 getNumberofConnectedSUs
0x08 getRSSIreadings
0x09 not valid
0x80 setStatus
0x81 setPublicKey
0x82 setPrivateKey
0x83 setDeviceID
0x84 setReset
0x85 not valid
0x86 not valid
0x87 not valid
0x89 not valid
0x8B setDATAPacket
In the Command Descriptions that follow, the command codes for each mode are
shown in the byte tables.
Status Command
The getStatus command is used to nd out the current status of the module.
getStatus SPI Mode:
0x01
UART Mode:
0x00
Byte 1 b7 b6 b5 b4 b3 b2 b1 b0
RFState Radio - - CH3 CH2 CH1 CH0