AW5800-SPEC USER’S MANUAL 5.
AW5800-SPEC User’s Manual Thank you for your purchase of the AW5800-SPEC Site Survey Spectrum Analyzer. The AW5800-SPEC includes: • • • • AW5800-SPEC Site Survey Spectrum Analyzer 120 VAC to 12 VDC power adapter AW-POE Power Over Ethernet Injector AW5-5800 5 dBi Omnidirectional Antenna If you have any questions when configuring your AvaLAN system, the best place to get answers is to visit www.avalanwireless.com. You will also find the latest updates there.
User’s Manual AW5800-SPEC Operational summary The AW5800-SPEC is a tool that allows you to investigate sources of RF interference in the 5.8 GHz band and to make better decisions about how to configure your AvaLAN wireless network. Leveraging the RSSI (Received Signal Strength Indication) capability from the AvaLAN AW5800xTR, this unit inexpensively provides a browser-interfaced RF spectrum analysis capability with appropriate frequency range and sensitivity for site survey applications.
AW5800-SPEC User’s Manual Using the Spectrum Analyzer 1. If you will be using a Windows PC, download the AvaLAN IP Discovery Utility from our website and extract ipfinder.exe from the zip archive, placing it on your desktop or in a convenient folder. http://www.avalanwireless.com >> Support >> Downloads Note that this utility runs only in MS Windows, not Linux or MAC. If you must use a non-Windows computer, make sure your subnet mask allows your computer to see 192.168.17.
User’s Manual AW5800-SPEC (Note that the IP address and other parameters for your unit will be different from those in the picture.) 5. Enter the password (default is “password”) and click “Login”. You will then see the main spectrum analyzer window similar to this: 6. The spectrum analyzer controls are quite simple: • The “Scan Now” button initiates a spectrum scan. • The Automatic Scan Interval dropdown allows you to select the time between scans.
AW5800-SPEC User’s Manual Sample Spectra Here is an example of a relatively quiet environment. If your scan shows that there is low in-band noise on all channels, you will probably want to leave your AvaLAN radio in auto-frequency selection mode, allowing it the opportunity to change channels as needed should interference arise later. This next example shows a strong in-band signal (in this case caused by another AvaLAN radio operating in the vicinity on Channel 5.
User’s Manual AW5800-SPEC Please note that it is quite common to see transient spikes in the 5.8 GHz band caused by cordless phones. They will not affect the reliability of data transmission, but if severe, they could degrade the data rate a bit because of sub-packet retransmissions. 5.8 GHz Channels Channel Frequency - MHz Channel Frequency - MHz Channel Frequency - MHz 0 Auto Mode 20 5767.7083 40 5809.3750 1 5728.1250 21 5769.7917 41 5811.4583 2 5729.6875 22 5771.8750 42 5813.
AW5800-SPEC User’s Manual Limited Warranty This product is warranted to the original purchaser for normal use for a period of 360 days from the date of purchase. If a defect covered under this warranty occurs, AvaLAN will repair or replace the defective part, at its option, at no cost. This warranty does not cover defects resulting from misuse or modification of the product. Technical support (650) 384-0000 PAGE 8 www.avalanwireless.