User`s manual

AW58300HTA, HTS User’s Manual
PAGE 11
Technical Support [phone]
www.avalanwireless.com
After conguring your AvaLAN radios and establishing links among them, you can use the browser
interface to view status and troubleshooting Information. The initial “Quick Set” page will show
whether the wireless link is operating and the current signal strength. For more comprehensive infor-
mation, choose “Wireless” from the Main Menu at the left side of the window. The “Wireless” page
leads to most of the useful status information.
The table on the Interfaces tab provides a list of the interface processes running in this radio. If it is
a Subscriber Unit, there will be only one, “Wireless_Radio.” If it is an Access Point, there will also be
a WDS process running for each Subscriber Unit that is connected. These very long rows summarize
the conguration details and current running status of the radio. You can click and drag in the heading
row of the table to change the column width if part of the data is not visible.
More detailed status: Do not click the small “D” button unless you want to disable the radio, requir-
ing power cycling to recover. Clicking anywhere else on the “Wireless_Radio” line drills down to more
information:
Viewing Status Information