Use and Care Guide

11
Normal Sounds
Your new beverage refrigerator may make sounds that are not familiar to you. Most of the new sounds are normal.
Hard surfaces like the floor or walls can make the sounds seem louder than they actually are. The following describes
the kinds of sounds that might be new to you and what may be making them.
• Rattling noises may come from the flow of the refrigerant or the water line.
• Items stored on top of the beverage refrigerator can also make noises.
• The high efficiency compressor may make a pulsating or high-pitched sound.
• The internal fan will run frequently to create a consistent internal temperature environment.
• Water running from the evaporator to the water bin may make a splashing sound.
• As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your beverage refrigerator.
• You may hear air being forced over the condenser by the condenser fan.
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
INTERIOR CLEANING:
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reinsert the shelves and beverages.
6. Reconnect power to the unit.
EXTERIOR CLEANING:
The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as two (2) tablespoons of
baking soda to one (1) quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with
clean water. Wipe with a soft clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor
when exposed to chlorine gas and moisture. Clean stainless steel with a cloth dampened with a mild detergent and
warm water solution. Never use an abrasive or caustic cleaning agent.
Preparing Your Beverage Refrigerator for Storage
If the beverage refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to
defrost the unit and dry the interior.
1. Disconnect the refrigerator from the power supply by removing the power plug from the wall socket.
2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells.
3. Once the interior is dry and clean the unit will be ready for storage.
CAUTION: Store the unit out of the reach of children. If you have children, you may want to take additional precautions
such as removing the door to prevent a child from being trapped inside the refrigerator.
IMPORTANT: Do NOT touch the power plug when your hands are wet. NEVER unplug the unit by pulling the plug.