Owner's Manual

11
Installing the Door Handle
Cauon: Do not over-ghten the screws as this may cause damage to the handle or to the stainless
steel door.
!
To install the door handle:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door unl the screw passes through the door.
3. Align the handle with the screws and ghten using a Phillips head screwdriver unl the handle is ush
against the door frame.
4. Carefully press the door gasket into its original posion.
Installing the Casters
This unit comes with four (4) casters. These are an oponal accessary to assemble if you would like to make
the unit more mobile. To install the casters:
1. Carefully lower the refrigerator onto a so surface such as a blanket.
2. Separate the front casters and back casters. The front casters have a lever for a brake lock.
3. Place the top plate of the caster over the area of the removed leveling leg and align the opening to the
screw hole openings.
4. Insert the screws to aach the caster to the cabinet.
5. Make sure the screws are ght so the caster is installed rmly.