USER’S GUIDE Installation, Operation, and Maintenance for your product. Built-In Wine Cooler Model – AWC241DZRH / AWC241DZLH www.avallon.com V2.
Important Safety Information Improper handling can cause serious damage to the Avallon wine refrigerator and / or injury to the user. This wine refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the rating label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
GENERAL SAFETY • • • • • • • • • • • • • • • To prevent back and other types of injuries, use at least two people to move and install the wine cooler. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents Important Safety Information ........................................................................................................................................... ii Table of Contents............................................................................................................................................................. iv Introduction....................................................................................................................................
First Time Operating Instructions: Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you need to move or ship the appliance in the future. Allow the unit to stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Introduction Thank you for purchasing your Avallon wine refrigerator. Avallon is dedicated to developing products that will enhance your lifestyle with superior quality and distinctive features. Please visit www.avallon.com for more information on your product and other Avallon products. This manual contains important information regarding the proper installation, use, and maintenance of your wine refrigerator.
Parts Identification Full View Empty View 2
Carbon Filter A built-in carbon filter protects your wine by acting as a natural barrier against harmful odors. Internal Fan This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature. Note: The carbon filter should be replaced every 3 - 6 months depending on the unit’s exposure level to odor. If the unit is placed in a kitchen, regular replacement every three (3) months is ideal.
TYPES OF INSTALLATION: This wine refrigerator has been designed for free-standing or built-in installation. In every case, there must be adequate ventilation and access for service. Free-standing Installation A free-standing installation will allow you to install the wine refrigerator in almost any place you desire. You must follow the stated instructions for electrical requirements and leveling the wine refrigerator.
Installation Clearance Requirements: When installing the wine refrigerator under a counter, follow the recommended spacing dimensions shown. • To ensure proper service access and ventilation, allow between 1 - 2 inches of clearance at the back as shown in the diagram. • The installation should allow the unit to be pulled forward for servicing, if necessary.
RECOMMENDED GROUNDING METHOD: For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3pronged wall socket, and grounded in accordance with the National Electrical Code and local codes and ordinances.
INSTALLING THE SHELVES: 1. Open the door completely. 2. Push the shelf tracks affixed to the walls of the inner cabinet to the rear of the unit so that the tracks are fully seated inside the cooler compartment. 3. Line up the rails affixed to the shelf with the corresponding wine cooler tracks attached to the inner cabinet walls. 4. Push the front of the shelf inwards evenly until the shelf rests fully inside of the unit and you are able to close the door. 5. The shelf should glide smoothly back and forth.
USING YOUR CONTROL PANEL: This wine cooler has a temperature range from 40° F to 65° F. The upper zone has a temperature range of 40° F to 54° F. The lower zone has a temperature range of 54° F to 65° F. Power Button Press and hold this button down for three seconds to power your unit on. Once pressed, the “Run” indicator light will illuminate to indicate the unit is on and running. Press and hold this button for three seconds again and the unit will power off and the “Run” Indicator light will turn off.
Note: Pressing and holding the Upper Zone and Lower Zone Temperature buttons at the same time will switch the temperature display from °F to °C. Tip: If you powered the unit off, please wait at least five (5) minutes before powering it back on. Warning: Allow at least 24 hours for your wine cooler to run before storing your beverages to allow the temperature to acclimate. Whether your wine cooler can reach the actual set temperature depends on the ambient environmental conditions.
Defrosting Note that under most refrigerating settings, the unit will automatically defrost under most ambient conditions. However, on colder settings, some frost may build up. Additionally, the more humid the ambient conditions, the more frost may build up. Keep the door closed as much as possible and avoid opening the door unnecessarily to minimize frost build-up. If frost is preventing the door from closing properly, you may need to power the unit off until the frost melts.
Preparing Your Wine Refrigerator for Storage If the wine refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to defrost the unit and dry the interior. 1. Disconnect the cooler from the power supply by removing the power plug from the wall socket. 2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells. 3. Once the interior is dry and clean the unit will be ready for storage.
ISSUE The wine cooler is making strange noises. POSSIBLE CAUSE Certain sounds are normal The unit is not level or is touching another appliance. The body of the wine cooler is electrified. The unit is not properly grounded. Frost is forming in the wine cooler. The environment is humid. The ambient temperature is too low. The door is being opened too frequently. The door will not shut properly. The cooler is not level. The door gasket is dirty. The door gasket is not installed correctly.
Specifications DESCRIPTION OF PRODUCT Dual Zone Built-In Wine Refrigerator MODEL AWC241DZRH / AWC241DZLH VOLTAGE / FREQUENCY AC 115 / 60 Hz AMPERAGE 1.5 A INPUT POWER 120 W COLOR Black Cabinet with Stainless Steel Door STORAGE CAPACITY 46 Bottles* REFRIGERANT R600a, 1.4 oz. TEMPERATURE RANGE 40° F to 65° F DIMENSIONS (HEIGHT X WIDTH X DEPTH) 34 1/8” X 23 13/16” X 25 5/8” ** WEIGHT 128 Pounds Note: Technical data and performance information are provided for reference only.
Avallon Product Warranty 14
