Avalon Bay AB-WINE12S Thermoelectric Wine Cooler OWNER’S MANUAL Read and save these instructions.
Discover the Difference with Avalon Bay When value matters, Avalon Bay is ready to deliver. As a family-run business, we haven’t lost sight of what really matters to our customers. Our exclusive line of home appliances is both stylish and affordable, so you can create the homescape you desire without having to empty your wallet. Products you can rely on – that’s what value means to us. Please read this manual thoroughly and follow all instructions and safety guidelines.
Contents SPECIFICATIONS .……………………………………………………………………………………4 SPECIFICATIONS ............................................................................................ 4 IMPORTANT SAFETY INSTRUCTIONS ......................................................... 4 ELECTRICAL WARNINGS ................................................................................. 5 ELECTRICAL DIAGRAM.................................................................................... 5 IMPORTANT SAFETY INSTRUCTIONS ...........
Specifications MODEL NO. RATED VOLTAGE: CURRENT: POWER CONSUMPTION: STORAGE CAPACITY: TEMPERATURE RANGE: AB-WINE12S 100-127V / 60Hz 0.9 A (77°F/25°C) 70 watts 12 bottles 51 - 64°F (11 - 18°C) IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual regarding your appliance. Please read and obey all safety messages. Serious injury or even death can occur if these instructions are not carefully followed.
Electrical Warnings Improper use of the grounded plug can result in electrical shock. If the power cord is damaged, please contact customer service. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug, which is compatible with standard three prong wall outlets to minimize the possibility of electric shock. This appliance requires a standard 100-127 volt, 60Hz electrical outlet with a three-prong ground.
IMPORTANT SAFETY INSTRUCTIONS Do not operate this appliance if it has a damaged cord. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. Only connect the wine cooler to a properly polarized outlet. No other appliance should be plugged into the same outlet. Make sure the plug is fully inserted into the receptacle. Do not run the power cord over carpeting or heat insulators. Do not cover the cord.
GETTING TO KNOW YOUR WINE COOLER Features Holds up to 12 bottles of wine. Can age favorite vintages at ideal storage temperatures. External LED display and digital control panel provide easy monitoring. Set interior temperatures between 51° and 64°F for perfect storage or serving temperatures. Thermoelectric cooling system is quiet and vibration free. Shelves slide in and out for easy access, or can be removed to accommodate larger bottles.
List of Main Parts 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. HANDLE SHELF GLASS FOOT LOWER DOOR HINGE FAN MASK LED DISPLAY TEMPERATURE UP BUTTON TEMPERATURE DOWN BUTTON LIGHT DOOR FRAME HINGE COVER www.avalon-bay.
ASSEMBLY & INSTALLATION 1. Remove the exterior and interior packaging. Check that 3 shelves are included. If any parts are missing, please contact the dealer where you purchased the unit or Avalon Bay customer service. 2. Clean the interior surface with lukewarm water, using a soft cloth. 3. Place your wine cooler on a surface that is strong enough to support the appliance when it is fully loaded. To level your cooler, adjust the front legs at the bottom of the appliance. 4.
OPERATING INSTRUCTIONS It is recommended that you install the wine cooler in a place where the ambient temperature is between 50- 80°F (10-26°C). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing this wine cooler in extreme cold or hot conditions may cause interior temperature to fluctuate. The desired range of 51-64°F (11-18°C) may not be reached.
CLEANING & MAINTENANCE Cleaning your wine cooler 1. Unplug the wine cooler and remove the bottles. 2. Wash the inside with a solution of warm water and baking soda. The solution should be about 2 tablespoons of baking soda to a quart of water. 3. The outside of the wine cooler should be cleaned with mild detergent and warm water. 4. Pull out the condensation tray at the bottom of the unit and wash it. Moving your wine cooler 1. 2. 3. 4. 5. Remove all the bottles.
DETAILED PARTS DIAGRAM 1. Door 2. Temperature control board 3. Shelf 4. Cooling fan mask 5. Lamp cover 6. Light 7. Upper door hinge 8. Upper door hinge cover 9. 10. 11. 12. Hinge hardware Foaming cabinet Plastic screw Power control board 13. Exhaust fan 14. Rear panel 15. Power cord www.avalon-bay.com 16. Exhaust fan bracket 17. Cooling system 18. Power cord clip 19. Feet 20. Condensation tray 21. Lower door hinge 22. Cooling fan 23.
TROUBLESHOOTING PROBLEM Cooler does not operate. POSSIBLE CAUSE The circuit breaker has been tripped or a fuse has blown. SOLUTION Reset the circuit breaker or check for a broken fuse. The ambient temperature is too warm. Lower the cooler’s temperature setting. Open the door less. The door is open too often. The door is left ajar. Wine cooler is not cold enough. The door gasket is worn and no longer seals the door properly. The cooler does not have the correct clearance for proper ventilation.
PROBLEM too much noise POSSIBLE CAUSE Something is blocking the fan blades. The wine refrigerator is not level. The door is not properly installed. The door will not close properly. The gasket sealing the door is dirty or worn out. The shelves are out of position. LED display does not work, or it shows an error. There may be a problem with the main control board. SOLUTION Check the fan to make sure there is no debris or obstruction. If not, contact the manufacturer. See above.
Warranty Terms: During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer’s discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs. Warranty Exclusions: The warranty will not apply if damage is caused by any of the following: Power failure. Damage in transit or when moving the appliance.