Use and Care Manual

a) Grasp plug and remove from the receptacle or

other outlet device. Do not unplug by pulling

on cord.

b) Open fuse cover. Slide open fuse access

cover on top of attachment plug towards blades.

c) Remove fuse carefully. Insert the tip of a tool

into fuse slot, then pry the fuse gradually and

slowly, but do not overexert. If it feels tight, you can

try it several times and pry the fuse little by little.

When one side of the fuse has been pried, then you can get the fuse out entirely.

d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

e) Close fuse cover. Slide the fuse access cover closed on top of attachment plug.

f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that

should not be removed. Discard product if the attachment plug is damaged.

Notice:

1. When you replace the fuse, please don’t operate suddenly or overexert, or else

the product will become damaged.

2. When it is not easily operated, please make sure it is inserted the right way.

USER SERVICING INSTRUCTIONS

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.

Remove any soap film thoroughly with clean water.

3. Be sure not to allow water or other liquid enter inside of motor.