A few simple steps to ensure perfect water, every time.
Use and Care Guide MODELS: A10-TL Registration Please visit the website below to register your new water cooler within the first 30 days of purchase. Registration within the first 30 days will activate your one year warranty. www.avalonh2o.com/register-my-avalon-cooler Please keep your model number, order number and purchase date for future support. You can reach us at 1-800-256-0695.
Contents About Your Water Cooler Meet Your Avalon Product Part Names 1 2-3 Indicator Lights 4 Tech Specs 5 Getting Started Unpacking Operation Instructions 7 9-10 Cleaning Rinsing, Cleaning and Draining 12-14 Cleaning 15-16 Troubleshooting 18-19 Safety 21-22
About Your Water Cooler Meet Your Avalon Product Attractive Design Custom Temperature Top Loading Attractive stainless steel design with 3 water spouts Piping hot, room temperature or crisp cold water Suitable for 3 or 5 gallon bottles UL Listed Energy Star Approved Child Safety Feature We design & manufacture with your safety in mind Saves the environment & your wallet Ensures safe hot water flow for the entire family 1
About Your Water Cooler Part Names 3. Cooling Indicator Light 1. Power Indicator Light 2. Heating Indicator Light 6. Room Temperature Water Push Button 4. Hot Water Push Button 5. Child Safety Lock 9. Hot Water Spout 10. Room Temp Spout 2 7. Cold Water Push Button 8. Bottle Supporter 11. Cold Water Spout 12.
About Your Water Cooler Part Names 13. Cooling Switch 14. Heating Switch 15. Power Cord 16. Condenser 17.
About Your Water Cooler Indicator Lights Power Indicator Light This light will remain on as long as the water cooler is plugged in to indicate that the cooler is on. Heating Indicator Light This light will indicate when the water is heating. The light will remain on while the water is heating and will turn off when it has reached the correct temperature of 185°F. As the water is dispensed the hot tank will refill and the water will heat. As the water reheats this indicator light will turn on.
About Your Water Cooler Tech Specs Model A10-TL Hot/Cold/Room Temp Output 1.2L/min / 1.2L/min /1.0L/min Hot Water Capacity 4 L/H ( ≥ 185°F) Hot Tank Volume 1.02 Liters Cold Water Capacity 2 L/H ( ≤ 47°F) Cold Tank Volume 3 Liters Product Size 13”(L)x12”(W)x40”(H) Packing Size 16”(L)x15”(W)x42.5”(H) Net Weight/Gross Weight 34.17 lb /38.
Getting Started 6
Getting Started Unpacking Your Avalon Water Cooler The unit has been cleaned prior to departing from the factory. To remove any dust and debris that may collect during shipping we recommend cleaning the unit prior to installation. For cleaning instructions see pages 12-16. Locating Dispenser Do NOT plug in the power cord yet. Place dispenser upright on a hard and level surface in a cool and shaded location near a grounded wall outlet.
Getting Started Operation Instructions Do not plug in the machine or turn on the heating (#14) and cooling (#13) switches until water has begun to dispense from the cold (#5) and hot (#8) water spout. 1. Remove any label or sticker from the mouth of the bottle. 8 2. Vertically insert the bottle into the bottle supporter (#1) on the top of the machine. The bottle supporter has a built-in puncturing rod to allow you to use spill proof caps without opening the plastic bottle seals.
Getting Started Operation Instructions 3. Depress the hot (#4) cold (#7) and the room temperature (#6) water push button to dispense water from each spout. To dispense the hot water, slide the red child safety lock (#5) to the left and depress the hot water push button (#4) downward to begin the flow of water. You must slide the child safety lock (#5) and push the button simultaneously. 4. Once water is dispensing from both spouts insert the power plug into a power socket.
Getting Started Operation Instructions 5. Once the switches are in the on (I) position the heating indicator light (#2) and the cooling indicator light (#3) will turn on. It will take about 15 – 20 minutes for the hot water to heat to the appropriate temperature. It will take about 1 hour for the cold water to cool to the appropriate temperature. 1 hr 15-20 min Cold Hot 7. To replace the bottle vertically, pull out the empty bottle with two hands.
Cleaning 11
Cleaning Rinsing, Cleaning, and Draining To prolong the lifetime of the machine, it is recommended that the unit be cleaned and sanitized manually about every six months. To clean the outside of the unit Use a disinfectant of your choice to wipe down the outside of the machine. Disinfectant does not come with this unit. It can be purchased separately from a local store. To rinse the inside of the unit The machine has been disinfected prior to departing from the factory.
Cleaning Rinsing, Cleaning, and Draining 3. Dispense about 2 liters of water from the unit into a bucket by pressing dispense buttons for each temperature. 4. Place a large bucket beneath the drain outlet (#17) located on the back of the unit. Remove the drain cover and plug and allow the water to drain from the unit. Water will start flowing as soon as the drain cover is removed. Caution: The dispenser will heat water to a temperature of approximately 185°F.
Cleaning Rinsing, Cleaning, and Draining 5. Remove any remaining water in the tanks by dispensing water from the hot (#5) and cold (#9) water spouts into a bucket. 14 6. After draining is complete, replace the drain cover and plug and use the machine as normal.
Cleaning Cleaning To remove mineral deposits that may have built up inside the the cold tank, mix 4 L of water with 200 g of citric acid crystals (not included) or a cleaning solution of your choice. 1. Twist or lift off the bottle supporter (#8). 2. Put the mixture into the machine's cold tank and make sure the water can flow out of the hot water spout (#9).
Cleaning Cleaning 3. Plug in the power cord and turn on (I) the heating switch (#14). Allow the water to heat for 15 minutes. 4. Turn off (O) the heating switch (#14) and allow the liquid mixture to cool down for 20 minutes. 15 min 5. Drain the liquid from the drain outlet (#17), then flush with water two or three times by following the rinsing instructions above. Only disassemble parts mentioned to avoid damaging the machine.
Troubleshooting 17
Troubleshooting Troubleshooting If you are having trouble with your water cooler please see the following solutions. You can also view our trouble shooting videos at the website below. Please feel free to contact us with any questions. 1-800-256-0695 support@avalonh2o.com www.avalonh2o.
Troubleshooting Troubleshooting Water not dispensing at a hot or cold temperature This could be caused by an over consumption of water in a short period of time causing the tanks to empty. Please allow 5 to 10 minutes for the water cooler tanks to refill. Allow the proper time for the water to heat and cool. This could be caused by an interruption in the power supply. Please ensure that the power cord is connected to an outlet.
Safety 20
Safety Safety To reduce risk of injury and property damage, user must read this entire guide before assembling, installing and operating the dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use this properly can cause personal injury.
Safety Safety • • • • • • • • • • • • 22 Ensure dispenser is unplugged prior to cleaning. Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use by children. Service should be performed only by a certified technician. Warning: Do not damage the refrigerant circuit.