Use and Care Manual

7
Unpacking your Avalon Water Cooler
The unit has been cleaned prior to departing from the factory. To remove any
dust and debris that may collect during shipping we recommend cleaning the
unit prior to installation. For cleaning instructions, see pages 17-21.
Do NOT plug in the power cord yet.
Place dispenser upright on a hard and level surface in a cool and shaded
location near a grounded wall outlet. Position the dispenser so there is about four
inches of clearance from the wall on the back and both sides.
Unpack the machine, open the cabinet to remove the drip tray, and install it by
inserting it into place at the top of the cabinet door, see page 10.
Locating Dispenser
Unpacking
Getting Started