A few simple steps to ensure perfect water, every time.
Use and Care Guide MODELS: A1TL • A2TL Registration Please visit the website below to register your new water cooler within the first 30 days of purchase. Registration within the first 30 days will activate your one year warranty. www.avalonh2o.com/register-my-avalon-cooler Please keep your model number, order number and purchase date for future support. You can reach us at 1-800-256-0695.
Contents About Your Water Cooler Meet Your Avalon Product 1 Part Names 2 Indicator Lights 3 Tech Specs 4 Getting Started Unpacking Operation instructions 6 7-9 Cleaning Rinsing, Cleaning and Draining 11-13 Cleaning 14-15 Troubleshooting 17-18 Safety 20-21
About Your Water Cooler Meet Your Avalon Product Attractive Design Custom Temperature Top Loading Attractive design with press-paddle spouts Piping hot, or crisp cold water Suitable for 3 or 5 gallon bottles UL Listed Energy Star Approved Child Safety Feature We design & manufacture with your safety in mind Saves the environment and your wallet Ensures safe hot water flows for the entire family 1
About Your Water Cooler Part Names 2. Heating Indicator Light 1. Bottle Supporter 4. Power Indicator Light 3. Cooling Indicator Light 7. Child Safety Lock 8. Hot Water Spout 5. Cold Water Spout 9. Hot Water Press Paddle 6. Cold Water Press Paddle 10. Drip Tray 11. Cooling Switch 12. Heating Switch 13. Power Cord 14. Drain Outlet 15.
About Your Water Cooler Indicator Lights Power Indicator Light This light will remain on as long as the water cooler is plugged in to indicate that the cooler is on. Heating Indicator Light This light will indicate when the water is heating. The light will remain on while the water is heating and will turn off when it has reached the correct temperature of 185°F. As the water is dispensed the hot tank will refill and the water will heat. As the water reheats this indicator light will turn on.
About Your Water Cooler Tech Specs 4 Model A1TL • A2TL Hot/Cold Temp Output 1.2L/min / 1.2L/min Hot Water Capacity 4 L/H ( ≥ 185°F) Hot Tank Volume 1.02 Liters Cold Water Capacity 2 L/H ( ≤ 47°F) Cold Tank Volume 3 Liters Product Size 11.25”(L)x10.75”(W)x42”(H) Packing Size 15.5”(L)x14.3”(W)x46.5”(H) Net Weight/Gross Weight 30.65 lb /34.
Getting Started 5
Getting Started Unpacking Your Avalon Water Cooler The unit has been cleaned prior to departing from the factory. To remove any dust and debris that may collect during shipping we recommend cleaning the unit prior to installation. For cleaning instructions, see pages 11-15. Locating Dispenser Do NOT plug in the power cord yet. Place dispenser upright on a hard and level surface in a cool and shaded location near a grounded wall outlet.
Getting Started Operation Instructions Do not plug in the machine or turn on the heating (#12) and cooling (#11) switches until water has begun to dispense from the cold (#5) and hot (#8) water spout. 1. Remove any label or sticker from the mouth of the bottle. 2. Vertically insert the bottle into the bottle supporter (#1) on the top of the machine. The bottle supporter has a built-in puncturing rod to allow you to use spill proof caps without opening the plastic bottle seals.
Getting Started Operation Instructions 3. Press the hot (#9) and cold (#6) water press paddles for the hot (#8) and the cold (#5) water spout to dispense a drop of water. To dispense water from the hot water spout (#8), please press and hold the red child safety lock button (#7) and press the hot water press paddle (#9) simultaneously. For hot water 8 For cold water 4. Once water is dispensing from both spouts insert the power plug into a power socket.
Getting Started Operation Instructions 5. Once the switches are in the on position the heating indicator light (#2) and the cooling indicator light (#3) will turn on (I). It will take about 15 – 20 minutes for the hot water to heat to the appropriate temperature. It will take about 1 hour for the cold water to cool to the appropriate temperature. 1 hr 15-20 min Cold Hot 6.
Cleaning 10
Cleaning Rinsing, Cleaning, and Draining To prolong the lifetime of the machine, it is recommended that the unit be cleaned and sanitized manually about every six months. To clean the outside of the unit Use a disinfectant of your choice to wipe down the outside of the machine. Disinfectant does not come with this unit. It can be purchased separately from a local store. To rinse the inside of the unit The machine has been disinfected prior to departing from the factory.
Cleaning Rinsing, Cleaning, and Draining 3. Dispense about 2 liters of water from the unit into a bucket by pressing the hot water press paddle (#9) and the cold water press paddle (#6) into a bucket. 4. Place a large bucket beneath the drain outlet (#14) located on the back of the unit. Remove the drain cover and allow the water to drain from the unit. Water will start flowing as soon as the drain cover is removed. Caution: The dispenser will heat water to a temperature of approximately 185°F.
Cleaning Rinsing, Cleaning, and Draining 5. Remove any remaining water in the tanks by dispensing water from the hot water spout (#8) and the cold water spout (#5) into a bucket. 6. After draining is complete, replace the drain cover and use the machine as normal.
Cleaning Cleaning To remove mineral deposits that may have built up inside the the cold tank, mix 4 L of water with 200 g of citric acid crystals (not included) or cleaning solution of your choice. 1. Twist off the bottle supporter. 14 2. Put the mixture into the machine's cold tank and make sure the water can flow out of the hot water spout (#8).
Cleaning Cleaning 3. Plug in the power cord and turn on (I) the heating switch (#12). Allow the water to heat for 15 minutes. 15 min 4. Turn off (O) the heating switch (#12) and allow the liquid mixture to cool down for 20 minutes. 20 min 5. Drain the liquid from the drain outlet (#14), then flush with water two or three times by following the rinsing instructions above. Only disassemble parts mentioned to avoid damaging the machine.
Troubleshooting 16
Troubleshooting Troubleshooting If you are having trouble with your water cooler please see the following solutions. You can also view our trouble shooting videos at the website below. Please feel free to contact us with any questions. 1-800-256-0695 support@avalonh2o.com www.avalonh2o.
Troubleshooting Troubleshooting No water dispensing from spouts This could be caused by the water bottle being empty. Please replace the bottle and allow 5-10 minutes for the water cooler tanks to fill up. Allow the proper time for the water to heat and cool. This could be the result of the bottle supporter (#1) being blocked. Please lift the bottle from the bottle supporter with two hands. Check to ensure that the seal or possible paper from the bottle is not causing a blockage. Install the bottle again.
Safety 19
Safety Safety To reduce risk of injury and property damage, user must read this entire guide before assembling, installing and operating the dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use this properly can cause personal injury.
Safety Safety • • • • • • • • • • • • Ensure dispenser is unplugged prior to cleaning. Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use by children. Service should be performed only by a certified technician. Warning: Do not damage the refrigerant circuit.