Use and Care Manual

22
Replacing the Filters
User Guide and Maintenance
6. Insert the probe assembly back into
the bottle. Slide the collar down until it
clicks into place. Push the head down
until the tube hits the bottom of the
bottle.
7. Slide the bottle into the cabinet.
8. After replacing the filters, press
the Filter Reset Button (#15) 3 times
consecutively, and close the door.
9. In order to flush the new filters, allow
the water to flow from the cool water
spout (#11) and cold water spout (#12)
for approximately 2 minutes.
3x
collar
head
2 min2 min
Replace Filters